Aluminum Brake Pedal Pad has a waffled rubber insert that matches the throttle pedal and the 1/2" threaded stud.
3238A-1/2”..............................................................$25.00
3221F-1......1-3/4” F.................................................$36.00
3221F-2......2” F........................................................$36.00
3221R.........2-1/4” Rear..........................................$36.00
3355............SS Front Shackles.............................$70.00
Standard front and rear shackles are con-structed with grade 5 press in studs and moly-nylon bushings.
The solution to mounting headlights on a Hi-Boy, these aluminum brackets make a clean and simple bolt-on installation and are available polished or unpolished.
3375.........Plain..........................................................$56.00
3375P......Polished...................................................$65.00
Aluminum pedal with a splined shaft for easy adjustment. The pedal mounts to the inside of the firewall with 2 screws from the engine side. It can be used with a solid rod or cable.
3204........................................$85.00
Front cross member is die stamped from 3/16” steel and was originally designed to replace the stock cross member, lowering the front of the ‘32 chassis and leaving plenty of room for the radiator and other components. (Must be mounted in a boxed frame)
3250........................................................................$ 75.00
Stainless steel V-spreader bar follows the contour of the original ‘32 grill and comes in stock or narrow widths. highly polished. Also available for ‘34 Fords.
3362V-32 1932 V-Bar Polished.......................$140.00
3362V34 1934 V-Bar polished.........................$160.00
V-spreader bars with turn signal lights. With this option, you can get the beauty of our V-Bar and take care of the problem of where to put turn signals all in one.
3362VT-32.....1932 V-Bar w/Lights....................$300.00
3362VT34......1934 V-Bar w/lights......................$325.00
1932 front and rear spreader bars in the exact dimensions as the originals. We use 1-1/2” tubing for the front, 2” for the rear and spreader bars are available in plain steel or highly polished stainless steel.
3209...........Plain Steel-Front ................................$42.00
3210...........Plain Steel-Rear.................................$53.00
3362...........Polished Stainless-Front..................$68.00
3363...........Polished Stainless-Rear..................$98.00
3362T32....Pre-Polished Stainless-Front
w/lights...............................................$225.00
3363T.........Pre-Polished Stainless-Rear
w/lights..............................................$325.00
